Absolute Fire Protection, LLC - Our Background & Mission


The primary vision of Absolute Fire Protection, LLC is to educate the consumer about the importance and practicality of fire protection sprinkler systems to ensure life safety and property protection.

The fire protection industry has two sides. The primary side of the business is the initial installation which is a substantial and sometimes costly investment. The second side is maintenance and periodic inspection of these systems. In our opinion, maintenance and inspections are the most important component of a properly operating fire sprinkler system.

In the aftermath of major system disasters, 95% of the time the cause of failure would have been identified during a proper and thorough system inspection.

In addition to the design and installation of fire sprinkler systems, Absolute Fire Protection is dedicated in assisting our clients to recognize potential failures with guidance and repair options, while minimizing costs.

With a passion, we diligently emphasize the purpose of a fire protection system is not just to meet code, but to PROTECT LIFE AND PROPERTY.


  • Established 2011
  • A combined 30 plus years' experience in fire sprinkler system inspections
  • A total of 100 plus years' experience in the design and installation of fire sprinkler systems


  • New England Water Works Association (NEWWA ) Backflow Certified
  • National Fire Sprinkler Association (NFSA)
  • National Institute for Certification in Engineering Technologies (NICET) Certified
  • TYCO and National Fire Protection Association (NFPA) 25 - Wet and Dry Pipe Sprinkler Systems inspection & testing
  • Blazemaster Fire Sprinkler System


  • National Fire Protection Association (NFPA)
  • Northeastern Subcontractors Association, Inc (NESCA)
  • Eastern Contractors Association (ECA)
  • National Fire Sprinkler Association (NFSA)
  • Capital Region Builders and Remodelers Association (CRBRA)
  • National Association for Home Builders (NAHB)
  • New York State Builders Association (NYSBA)

Inspect to Protect

get a quote Don't delay safety, contact Absolute Fire Protection to inspect and protect!

Quick FAQ....

I have a standpipe system with two risers. The original design indicates a total flow of 750 gpm (2839 Lpm). Am I required to flow this much water for the five year flow test?

No. When conducting the five year flow test, one riser is tested at a time. Therefore, the flow should be a total of 500 gpm (1892 Lpm), 250 gpm (946 lpm) for each of the two topmost outlets.